Diacom-SOLO-FREQ-Personal-Medio

DIACOM-SOLO-FREQ-Personal-Medio

DIACOM-SOLO-FREQ-Personal-Medio is a compact autonomous generator of low-energy electromagnetic impulses designed for operation with defined frequencies and frequency programs.

The device is registered by certification authorities as a generator of low-energy electromagnetic waves and is intended for frequency-based action on microorganisms, primarily pathogenic microflora, in various media containing at least 35% water.

MEDIO combines compact dimensions, a built-in display, internal memory, autonomous power supply, and its own control system. For everyday operation, the device does not require a permanent connection to a computer.

The latest modification of the device can operate autonomously for up to 13 hours, allowing MEDIO to be used at home, in the workplace, while travelling, and in other situations where using a computer is inconvenient.

Intended Purpose and Operating Principle

Devices of this class are intended for frequency-based action on microorganisms in various media containing at least 35% water.

The presence of water provides electrical conductivity within the medium and enables transmission of the generated electromagnetic signal.

The declared operating principle is based on exposing the cellular structures of microorganisms to an electromagnetic field of a defined frequency.

According to the underlying concept of frequency-based action, when certain frequency characteristics coincide, resonant oscillations may occur in the membrane of a microorganism cell, potentially leading to disruption of its structure.

The frequencies generated by the device are selective in nature and are chosen for operation with specific groups of microorganisms and their corresponding frequency characteristics.

The primary application of MEDIO is operation with frequency programs intended for different types of pathogenic microflora and microorganisms.

MEDIO Basic Concept

Despite its compact size, DIACOM-SOLO-FREQ-Personal-Medio is a fully autonomous electronic device with its own control system and frequency generation circuitry.

The device memory can store:

🔹 individual frequencies

🔹 frequency combinations

🔹 frequency sequences

🔹 microprograms

🔹 specialized frequency programs

Once loaded, these programs can be used independently of a computer.

This makes it possible to use preconfigured programs almost anywhere while maintaining mobility and ease of operation.

Main Capabilities

🔹 Autonomous operation

MEDIO is equipped with a built-in battery, display, internal memory, and its own control system.

A permanent connection to a computer is not required to run programs already stored in the device.

🔹 Up to 13 hours of autonomous operation

The latest MEDIO modification provides up to 13 hours of autonomous operation, depending on the operating mode, battery condition, and operating environment.

🔹 Operation with frequency programs

The device can generate defined frequencies, frequency combinations, and programmed sequences according to the loaded microprograms.

🔹 Built-in memory

Programs are stored directly in MEDIO's internal memory and can be launched directly from the device.

🔹 Compact size

The enclosure dimensions are approximately:

150 × 90 × 25 mm

This makes the device easy to transport and use away from a permanent workstation.

🔹 Mobile personal use

MEDIO is intended for users who require a compact autonomous device for regular use with preconfigured frequency programs.

DIACOM-SOLO-FREQ-Personal-Medio Design

MEDIO is a compact portable device with a built-in display.

The enclosure includes:

🔹 built-in display

🔹 two LED indicators on the front panel

🔹 USB connector

🔹 connector for FREQ cables

🔹 device control elements

Enclosure dimensions:

📐 150 × 90 × 25 mm

Inside the main unit are:

🔹 electronic circuit board with components

🔹 communication system for connection to a personal computer

🔹 display control system

🔹 internal memory

🔹 lithium-polymer battery

🔹 electronic circuit for generation of low-energy electromagnetic signals

🔹 frequency program control system

🔹 embedded software

Display and Controls

The built-in display is used to show information about the current device status, selected program, and program execution.

Using the MEDIO interface, the user can:

🔹 select available programs

🔹 start a program

🔹 monitor its execution

🔹 view device status

🔹 monitor basic operating parameters

Once the programs have been loaded, most operations can be performed directly on the device.

Built-in Memory

MEDIO has its own internal memory for storing frequency programs and microprograms.

Once a program is loaded through a computer, it remains stored in the device and can subsequently be launched autonomously.

This separates two processes:

💻 program preparation and loading — via computer

📱 subsequent use — directly on MEDIO

The computer is therefore mainly required for configuration, updates, and loading programs rather than for continuous device operation.

Frequency-Based Action

The MEDIO generator is designed to produce low-energy electromagnetic signals with defined frequency parameters.

The software allows different frequency modes to be set for operation with specific groups of microorganisms.

Within its declared intended use, the device may be used for frequency-based action on microorganisms, including:

🔹 pathogenic microflora

🔹 bacteria

🔹 viruses

🔹 other groups of microorganisms for which corresponding frequency programs are available

The generated frequencies are selected according to the chosen program.

Operation in Different Media

One of the main conditions for the use of devices of this class is a sufficient water content in the relevant medium.

The recommended minimum water content is:

💧 at least 35%

This is associated with the fact that water and dissolved substances provide electrical conductivity in the medium and support the propagation of electrical and electromagnetic effects.

In accordance with its declared intended use, MEDIO can be used with various water-containing media provided that the specified operating conditions are observed.

FREQ Output

MEDIO is equipped with a dedicated FREQ output.

Through this output, frequency signals generated by the device are transferred to compatible FREQ cables.

The operating parameters of the signal are determined by the selected program.

The device supports frequency generation over a wide range, enabling the use of various preconfigured frequency programs.

Autonomous Power Supply

MEDIO is equipped with a built-in lithium-polymer battery.

This allows the device to operate autonomously without a permanent connection to a computer.

For the latest modification, operating time may reach:

🔋 up to 13 hours

Actual autonomous operating time depends on:

🔹 battery condition

🔹 selected operating mode

🔹 duration of use

🔹 operating conditions

🔹 battery age

⚠ A power adapter is not included in the standard MEDIO package.

Connection to a Computer

To connect MEDIO to a personal computer, the appropriate device driver must be installed.

The connection is used for:

🔹 loading frequency programs

🔹 updating the microprogram

🔹 modifying memory contents

🔹 service maintenance

🔹 diagnostics

🔹 device updates

A computer is not required to run frequency programs already stored in the device.

Software

MEDIO works with compatible DIACOM software.

Recommended software for managing frequency programs:

📌 DIACOM-GENERATOR

The software allows users to work with frequencies and prepared frequency programs for subsequent loading and use in the device.

For device updates, the following software is used:

📌 DIACOM-UPDATER

The appropriate MEDIO device driver must also be installed.

Interactive Update

DIACOM-SOLO-FREQ-Personal-Medio supports an interactive update function.

This feature allows new versions of embedded microprograms to be loaded automatically into the device.

To update the device:

1. Download and install from the official website:

🔹 DIACOM-UPDATER software

🔹 the appropriate device driver

2. Connect MEDIO to the computer and launch DIACOM-UPDATER.

The software will automatically check whether an update is available.

If a new version is detected, the software will load the corresponding microprogram into the device.

📥 Before starting the update, make sure that the Internet connection is stable and sufficiently fast.

⚠ During the update process, do not:

— disconnect MEDIO from the computer

— interrupt the software

— interrupt the power or USB connection

— restart the computer before the process is complete

Main Areas of Use

DIACOM-SOLO-FREQ-Personal-Medio is primarily intended for autonomous operation with frequency programs.

The device allows users to:

🔬 generate defined electromagnetic frequencies

🔬 work with individual frequencies

🔬 use frequency combinations

🔬 execute frequency sequences

🔬 work with programs intended for different groups of microorganisms

🔬 store programs in internal memory

🔬 use the FREQ output

🔬 operate autonomously without a computer

🔬 update the microprogram through a computer

🔬 use the device as a compact mobile generator

Key Advantages of MEDIO

DIACOM-SOLO-FREQ-Personal-Medio combines:

🔹 compact enclosure

🔹 dimensions of only 150 × 90 × 25 mm

🔹 built-in display

🔹 two LED indicators on the front panel

🔹 internal memory

🔹 built-in lithium-polymer battery

🔹 autonomous operation for up to 13 hours in the latest modification

🔹 frequency generation up to 1 MHz

🔹 FREQ output

🔹 USB connection

🔹 autonomous control

🔹 ability to load new microprograms

🔹 updates via DIACOM-UPDATER

🔹 compatibility with DIACOM-GENERATOR

The main advantage of MEDIO is the combination of frequency generator functionality with compact dimensions and full autonomy.

The device fits into a small bag or pocket and allows preconfigured programs to be used without a permanent connection to a personal computer.

Safety

DIACOM-SOLO-FREQ-Personal-Medio has undergone the required testing, including assessments of:

🛡 electromagnetic safety

🌿 environmental safety

👤 safety during use by people

🐾 safety during use in the presence of animals

The device must be used in accordance with the manufacturer's instructions and specified operating conditions.

Package Contents

The standard package includes:

✅ DIACOM-SOLO-FREQ-Personal-Medio

✅ USB cable

✅ FREQ cables

✅ Original transport case

✅ Accompanying documentation

⚠ A power adapter is not included in the standard package.

Technical Specifications

📱 Device type: low-energy electromagnetic impulse generator

📐 Enclosure dimensions: 150 × 90 × 25 mm

🖥 Display: built-in

💡 LED indication: 2 LED indicators on the front panel

🔌 Connection interface: USB

🔗 Output: FREQ

🔋 Battery: built-in lithium-polymer battery

⏱ Autonomous operation: up to 13 hours for the latest modification

⚡ Supply voltage: 5 V

🔌 Power source when connected: computer USB port

🔋 Current consumption: up to 300 mA

📡 Generated frequency range: 1 Hz – 1 MHz

💻 Communication speed: up to 1 MHz

💾 Internal memory: available

🔄 Interactive update: supported

💻 Operation without computer: supported

📂 Program storage in device: supported

Normal Climatic Operating Conditions

Normal climatic conditions for operation of the equipment are:

🌡 Temperature: +25 ±10 °C

💧 Relative humidity: 45–80%

🌬 Atmospheric pressure: 83–106 kPa

(630–800 mmHg)

The surrounding atmosphere should also be free from active aggressive substances.

MEDIO and MEDIO2-MAGNETO

DIACOM-SOLO-FREQ-Personal-Medio must be distinguished from DIACOM-SOLO-FREQ-Personal-Medio2-Magneto.

MEDIO is an autonomous personal frequency generator.

MEDIO2-MAGNETO is a separate modification equipped with an additional magnetic module and extended hardware functionality.

Therefore, the technical specifications and capabilities of MEDIO2-MAGNETO should not automatically be attributed to the standard MEDIO model.

Warranty

🛡 Diacom Technology® provides a limited 2-year warranty for DIACOM-SOLO-FREQ-Personal-Medio.

The warranty applies to the main electronic unit of the device when the specified operating conditions are observed.

The warranty does not cover:

— mechanical damage resulting from dropping the device

— damage caused by impact or other external influences

— damage caused by improper use

— liquid entering the device

— unauthorized opening or repair

— use of the device outside the specified operating conditions

— the battery

— cables included in the package

🔋 The battery is a consumable component.

For batteries installed in the device, the specified service period is 6 months.

Rechargeable batteries and batteries are considered consumable items and are not covered by the standard warranty service applicable to the main device.

Likewise, the warranty for the main electronic unit does not cover cables supplied with the equipment.

⚠ Since a power adapter is not included in the MEDIO package, it is not covered by the warranty obligations for this device.

Training and Technical Support

❗ The price of DIACOM-SOLO-FREQ-Personal-Medio does not include training or technical support.

Training, extended technical support, and additional service options, if required, are provided separately and charged according to the terms of the specific offer.

DIACOM-SOLO-FREQ-Personal-Medio

Compact dimensions, a built-in battery, autonomous operation for up to 13 hours, a wide generated frequency range, internal memory, and update capability make MEDIO a mobile tool for working with frequency programs without the need for continuous computer use.

DIACOM TECHNOLOGY® — frequency technology in a compact autonomous format.

Product Code:

🔗

Certification is available upon request. Documents are available in PDF format.