DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto is a compact next-generation autonomous device that combines a frequency generator, an integrated magnetic module, an enlarged display, and an autonomous control system in a single enclosure.

The device is designed to operate with defined frequencies, frequency programs, and additional magnetic-field exposure in accordance with the selected software modes.

MEDIO2-MAGNETO represents a further development of the DIACOM-SOLO-FREQ-Personal-Medio platform and retains its key advantages:

🔹 autonomous operation

🔹 compact design

🔹 internal memory

🔹 built-in battery

🔹 operation without a permanent computer connection

🔹 ability to load and update microprograms

🔹 operation with frequency programs

🔹 mobility

At the same time, MEDIO2-MAGNETO introduces two important hardware improvements:

🧲 integrated magnetic module

🖥 enlarged 3.5-inch display

For comparison, the previous MEDIO model is equipped with a 2.8-inch display.

The larger display makes the interface more convenient to use, improves information readability, and provides more comfortable control of selected programs and device operating parameters.

MEDIO2-MAGNETO Basic Concept

MEDIO2-MAGNETO is an autonomous personal DIACOM platform combining several hardware and software functions:

🔹 generation of defined electromagnetic frequencies

🔹 execution of frequency programs

🔹 generation of a magnetic field

🔹 autonomous program execution

🔹 digital control through the built-in interface

The device memory can store:

🔹 individual frequencies

🔹 frequency combinations

🔹 frequency sequences

🔹 microprograms

🔹 specialized frequency programs

🔹 programs using the magnetic module

🔹 combined operating modes

Once the required programs have been loaded, the device can operate autonomously without a permanent connection to a personal computer.

Intended Purpose and Operating Principle

MEDIO2-MAGNETO is intended for operation with defined frequency programs and additional magnetic-field exposure.

The frequency section of the device generates low-energy electromagnetic signals with defined frequency parameters.

The additional magnetic module generates a magnetic field according to the selected operating mode.

The device therefore combines:

🔹 frequency-based action

🔹 magnetic-field action

🔹 autonomous program execution

🔹 digital control of operating modes

🔹 operation with internal memory

Depending on the selected program, these hardware capabilities can be used separately or within combined operating modes.

Operation with Microorganisms and Frequency Programs

Like the standard MEDIO model, MEDIO2-MAGNETO is designed to work with frequency programs associated with specific frequency characteristics of microorganisms.

Devices of this class are intended for frequency-based action on microorganisms in various media containing at least 35% water.

The presence of water provides electrical conductivity within the medium and supports transmission of the generated signal.

The declared principle of frequency-based action is based on exposure of the cellular structures of microorganisms to an electromagnetic field of a defined frequency.

According to this concept, when certain frequency characteristics coincide, resonant oscillations may occur in the membrane of a microorganism cell, potentially leading to disruption of its structure.

Frequency programs may be designed for different groups of microorganisms, including:

🔹 pathogenic microflora

🔹 bacteria

🔹 viruses

🔹 other groups of microorganisms for which corresponding frequency programs are available

Integrated Magnetic Module

A key difference between DIACOM-SOLO-FREQ-Personal-Medio2-Magneto and the standard MEDIO is the integrated magnetic module.

It generates a magnetic field according to the selected software mode.

The magnetic module is integrated directly into the electronic architecture of the device and is controlled by the built-in system.

This makes it possible to:

🔹 use magnetic-field action without connecting a separate external device

🔹 work with magnetic software modes

🔹 combine magnetic and frequency-based functions

🔹 execute preconfigured programs autonomously

🔹 use MEDIO2-MAGNETO as a unified hardware and software platform

Enlarged 3.5″ Display

One of the important features of MEDIO2-MAGNETO is its new enlarged display.

🖥 MEDIO2-MAGNETO display diagonal: 3.5 inches

For comparison:

📱 DIACOM-SOLO-FREQ-Personal-Medio: 2.8 inches

📱 DIACOM-SOLO-FREQ-Personal-Medio2-Magneto: 3.5 inches

The larger screen improves everyday interaction with the user interface.

The enlarged display provides:

🔹 more convenient display of program names

🔹 improved readability of information

🔹 easier navigation

🔹 more convenient monitoring of device status

🔹 clearer display of the current operating mode

🔹 more comfortable interaction with programs and menus

The enlarged display is one of the most noticeable design differences between the new MEDIO2-MAGNETO generation and the previous MEDIO model.

Main Capabilities

🔹 Autonomous operation

MEDIO2-MAGNETO is equipped with a built-in battery, display, internal memory, and its own control system.

A permanent computer connection is not required to run programs already stored in the device.

🔹 Operation with frequency programs

The device can generate defined frequencies, frequency combinations, and programmed sequences.

🔹 Magnetic-field action

The integrated magnetic module allows the device to generate a magnetic field in accordance with the selected program.

🔹 Combined operating modes

Depending on the software, frequency and magnetic functions can be used within a single operating sequence.

🔹 Enlarged display

The 3.5″ display provides more convenient control and information display compared with the 2.8″ screen of the previous model.

🔹 Built-in memory

Prepared programs are stored directly in the device.

🔹 Autonomous control

After the programs are loaded, the user can select and launch them directly from the device.

🔹 Mobility

MEDIO2-MAGNETO is intended for use at home, in the workplace, while travelling, and away from a permanent workstation.

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto Design

MEDIO2-MAGNETO is housed in a compact portable enclosure.

The device includes:

🔹 built-in 3.5″ display

🔹 LED indication

🔹 control elements

🔹 USB interface

🔹 FREQ output

🔹 internal memory

🔹 built-in battery

🔹 electronic frequency generation module

🔹 integrated magnetic module

🔹 digital control system

🔹 embedded software

The device design allows the main functions to be performed autonomously without continuous use of a computer.

Display and Controls

The built-in 3.5-inch display is used to show:

🔹 selected program

🔹 current operating mode

🔹 device status

🔹 program execution progress

🔹 main operating parameters

🔹 interface and menu elements

Directly from the device, the user can:

🔹 select available programs

🔹 start a program

🔹 stop program execution

🔹 monitor the current operating mode

🔹 view device status

🔹 navigate through the menu

Compared with the previous MEDIO's 2.8″ display, the 3.5″ screen provides more comfortable interaction with the user interface.

Built-in Memory

MEDIO2-MAGNETO is equipped with internal memory for storing programs and microprograms.

The memory can contain:

🔹 frequency programs

🔹 frequency sequences

🔹 specialized microprograms

🔹 combined operating modes

🔹 programs using the magnetic module

Once the relevant program has been loaded, a computer is not required for its everyday execution.

FREQ Output

MEDIO2-MAGNETO supports operation through the FREQ output.

Through this output, frequency signals generated by the device are transferred to compatible FREQ cables and external system components.

The signal operating parameters are determined by the selected program.

Operation in Different Media

For frequency modes of devices in this class, operation with media containing a sufficient amount of water is recommended.

Approximate minimum level:

💧 at least 35% water

The presence of water is associated with the electrical conductivity of the medium and the propagation of electrical and electromagnetic effects.

The device can be used in the intended software modes with various water-containing media, provided that the specified operating conditions are observed.

Autonomous Power Supply

MEDIO2-MAGNETO is equipped with a built-in battery.

This allows the device to be used autonomously without a permanent connection to a computer or external power source.

Actual autonomous operating time depends on:

🔹 selected operating mode

🔹 battery condition

🔹 intensity of magnetic module use

🔹 program duration

🔹 operating conditions

🔹 battery age

⚠ Before extended operation, it is recommended to make sure that the battery charge level is sufficient.

⚠ A power adapter is not included in the standard package unless it is specifically listed in a particular offer.

Connection to a Computer

A computer is used primarily for device configuration and maintenance.

The connection allows:

🔹 loading programs

🔹 modifying internal memory contents

🔹 updating the microprogram

🔹 performing technical maintenance

🔹 diagnostics

🔹 installing software updates

To connect the device to a computer, the appropriate device driver must be installed.

A permanent PC connection is not required for everyday execution of programs already stored in the device.

Software

MEDIO2-MAGNETO works with compatible DIACOM software.

For operation with frequency programs:

📌 DIACOM-GENERATOR

For device updates:

📌 DIACOM-UPDATER

The software allows users to:

🔹 prepare frequency programs

🔹 load programs into the device memory

🔹 modify memory contents

🔹 update microprograms

🔹 perform service maintenance

🔹 work with compatible operating modes

Interactive Update

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto supports updating of its embedded software.

To update the device:

1. Download and install:

🔹 DIACOM-UPDATER

🔹 the appropriate device driver

2. Connect MEDIO2-MAGNETO to the computer.

3. Launch DIACOM-UPDATER.

The software will automatically check for available updates.

If an update is available, the corresponding microprogram will be loaded into the device.

📥 Before starting an update, make sure that the Internet connection is stable and sufficiently fast.

⚠ During the update process, do not:

— disconnect the device from the computer

— interrupt the USB connection

— close the update software

— switch off the device

— restart the computer before the process is complete

Main Areas of Use

MEDIO2-MAGNETO allows users to:

🔬 work with defined frequencies

🔬 use individual frequencies

🔬 use frequency combinations

🔬 execute frequency sequences

🔬 launch microprograms

🔬 work with programs for different groups of microorganisms

🔬 use the FREQ output

🔬 use the integrated magnetic module

🔬 use combined frequency and magnetic modes

🔬 store programs in internal memory

🔬 operate without a permanent computer connection

🔬 update the embedded software through a PC

Key Advantages of MEDIO2-MAGNETO

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto combines:

🔹 compact enclosure

🔹 enlarged 3.5″ display

🔹 internal memory

🔹 built-in battery

🔹 autonomous power supply

🔹 frequency generator

🔹 FREQ output

🔹 integrated magnetic module

🔹 autonomous control

🔹 operation without a PC

🔹 updatable embedded software

🔹 compatibility with DIACOM software

The main differences between MEDIO2-MAGNETO and the standard MEDIO are:

🧲 integrated magnetic module

🖥 increase in display size from 2.8″ to 3.5″

These changes expand the device's hardware capabilities and improve interaction with the user interface.

Safety

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto must be used in accordance with the manufacturer's instructions and the specified operating conditions.

During operation, the following should be taken into account:

🛡 electromagnetic safety

🧲 specific characteristics of magnetic module operation

🌿 environmental conditions

👤 requirements for use by people

🐾 conditions for use in the presence of animals

The magnetic module is an additional source of magnetic field and should only be used in the operating modes specified by the manufacturer.

Package Contents

Depending on the specific configuration, the package may include:

✅ DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

✅ USB cable

✅ FREQ cables

✅ Original transport case

✅ Accompanying documentation

⚠ A power adapter is not included in the standard package unless it is specifically listed in a particular offer.

Technical Specifications

📱 Device type: autonomous personal frequency generator with magnetic module

🖥 Display: built-in, 3.5″

📱 Display size of previous MEDIO: 2.8″

💾 Internal memory: available

🔋 Battery: built-in

📢 Operation with frequency programs: supported

🧲 Integrated magnetic module: available

🔗 FREQ output: supported

🔌 Computer connection: USB

💻 Operation without computer: supported

🔄 Firmware update: via computer

📂 Program storage in device: supported

⚙ Autonomous control: supported

🎒 Mobile use: supported

MEDIO2-MAGNETO and MEDIO

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto is a further development of the standard MEDIO model.

Both models are based on the concept of an autonomous personal frequency platform, but MEDIO2-MAGNETO introduces significant hardware enhancements.

DIACOM-SOLO-FREQ-Personal-Medio

🔹 autonomous frequency generator

🔹 2.8″ display

🔹 internal memory

🔹 built-in battery

🔹 FREQ output

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

🔹 autonomous frequency generator

🔹 enlarged 3.5″ display

🔹 integrated magnetic module

🔹 expanded hardware operating modes

🔹 internal memory

🔹 built-in battery

🔹 FREQ output

MEDIO2-MAGNETO therefore represents an expanded hardware version of the MEDIO platform.

Warranty

🛡 Diacom Technology® provides a limited 2-year warranty for the main electronic unit of DIACOM-SOLO-FREQ-Personal-Medio2-Magneto.

The warranty applies when the specified operating conditions are observed.

The warranty does not cover:

— mechanical damage

— drops and impacts

— liquid ingress

— improper use

— unauthorized opening or repair

— use of the device outside the specified operating conditions

— the battery

— cables and consumable components

🔋 The battery is a consumable component.

For batteries, the specified service period is 6 months.

Batteries and cables are not part of the main electronic unit and are not covered by the standard warranty service applicable to the main device.

⚠ If a power adapter is not included in the specific delivery, it is also not covered by the warranty obligations for this device.

Training and Technical Support

❗ The price of DIACOM-SOLO-FREQ-Personal-Medio2-Magneto does not include training or technical support.

Training, extended technical support, and additional service options are provided separately and charged according to the terms of the specific offer.

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto combines the capabilities of an autonomous frequency generator, internal memory, mobility, an enlarged 3.5″ display, and an additional integrated magnetic module.

Compared with the previous MEDIO, the new device offers a more convenient interface, a larger display area, and expanded hardware capabilities through integration of the magnetic module.

This makes MEDIO2-MAGNETO an expanded autonomous DIACOM platform for working with frequency and magnetic software modes without the need for a permanent computer connection.

DIACOM TECHNOLOGY® — frequency and magnetic technologies in a compact autonomous format.

Product Code:

🔗

Certification is available upon request. Documents are available in PDF format.