DIACOM-ENERSCAN

DIACOM®-ENERSCAN®

DIACOM®-ENERSCAN® is a compact DIACOM hardware and software device designed to register and evaluate electromagnetic-field fluctuations and to rapidly obtain information about frequency-related factors that may negatively affect normal human functioning.

The device is used together with DIACOM-FASTSCANER software, which provides rapid scanning, processing of the obtained data, comparison with software references, and generation of the corresponding results.

The main purposes of DIACOM®-ENERSCAN® are:

🔹 rapid acquisition and analysis of data on frequency deviations

🔹 identification of the most active negative factors

🔹 operation with software references for pathogenic microflora and other factors

🔹 generation of recommendations for dietary supplements

🔹 selection of dietary supplements within specialized manufacturer databases

🔹 preparation of information for further work with compatible DIACOM devices

DIACOM®-ENERSCAN® is not a medical device and is not intended to establish a medical diagnosis or replace professional medical care.

Main Purpose of DIACOM®-ENERSCAN®

The primary purpose of the device is to obtain data on the basis of which DIACOM-FASTSCANER software helps generate recommendations for dietary supplements and their use.

The system analyzes the obtained information and compares it with available software databases and reference values.

Based on the scanning results, DIACOM-FASTSCANER can generate a list of the most suitable products from the database of a selected dietary-supplement manufacturer.

This allows ENERSCAN to be used as an auxiliary tool for:

🔹 selection of dietary supplements

🔹 assessment of product correspondence to the obtained data

🔹 prioritization of individual products

🔹 creation of an individual list of recommended supplements

🔹 operation with databases of specific manufacturers

Operation with Dietary Supplements

One of the main areas of use of DIACOM®-ENERSCAN® is integration with databases of dietary-supplement manufacturers.

DIACOM-FASTSCANER software can be adapted to work with the products of a specific company.

After scanning, the system:

receives data from DIACOM®-ENERSCAN®;

processes it in DIACOM-FASTSCANER;

identifies the most pronounced frequency deviations;

compares the obtained information with the software database;

generates a list of products from the selected manufacturer;

helps determine a possible sequence for using dietary supplements.

Thus, ENERSCAN can be used as an automated tool for working with the product range of dietary-supplement manufacturers.

Specialized Manufacturer Databases for Dietary Supplements

Specialized software databases can be created for individual manufacturers.

They can include products whose characteristics have been entered into the system in advance and are available for subsequent software comparison.

DIACOM-FASTSCANER can compare scanning results with such a database and automatically generate a list of the most suitable products.

This makes the system a convenient tool for:

🔹 dietary-supplement manufacturers

🔹 official representatives

🔹 consultants

🔹 specialists working with products from a specific manufacturer

🔹 centers using DIACOM hardware and software systems

Second Area of Application — Rapid Identification of Active Factors

A second important task of DIACOM®-ENERSCAN® is the rapid identification of the most active factors that may negatively affect normal human functioning.

Within the DIACOM-FASTSCANER software analysis, the system can identify:

🔹 pronounced frequency deviations

🔹 pathogenic factors

🔹 pathogenic microflora

🔹 various negative frequency influences

🔹 other highly active factors present in DIACOM software databases

The purpose of such scanning is not medical diagnosis, but rather obtaining an informational picture for further analysis and work with compatible DIACOM devices.

Rapid Scanning

One of the main advantages of DIACOM®-ENERSCAN® is its high operating speed.

A typical scan takes approximately:

⏱ 3 minutes

In a short time, the device acquires a data set that is then processed in DIACOM-FASTSCANER.

This makes it possible to quickly identify the most pronounced factors and proceed to the next stage of analysis.

DIACOM-FASTSCANER

DIACOM-FASTSCANER is the main software for working with DIACOM®-ENERSCAN®.

This software provides user interaction with the device and processing of the registered data.

DIACOM-FASTSCANER is used for:

🔹 rapid scanning

🔹 receiving data from ENERSCAN

🔹 digital processing of registered signals

🔹 analysis of electromagnetic fluctuations

🔹 comparison of data with software references

🔹 identification of the most active factors

🔹 generation of lists of identified factors

🔹 visualization of results

🔹 operation with databases of pathogenic microflora

🔹 operation with dietary-supplement databases

🔹 selection of dietary supplements

🔹 generation of recommendations

🔹 preparation of information for further use with other DIACOM devices

Thus, DIACOM®-ENERSCAN® and DIACOM-FASTSCANER operate as a unified hardware and software system.

Scanning Results

After the scan is complete, DIACOM-FASTSCANER can display the obtained data in various forms:

🔹 two-dimensional images

🔹 three-dimensional images

🔹 graphical representations

🔹 electrograms of electromagnetic fluctuation oscillations

🔹 pictographic symbols

🔹 lists of identified factors

🔹 informational indicators

🔹 comparative data

Software processing makes it possible to compare the obtained information with references contained in the database.

Operation with Microorganisms and Pathogenic Factors

Within software analysis, DIACOM-FASTSCANER can use databases containing information on various factors, including:

🔹 pathogenic microflora

🔹 bacteria

🔹 viruses

🔹 fungal factors

🔹 other microorganisms

🔹 various frequency-related factors

🔹 negative external influences

The software displays the items showing the strongest correspondence with the registered data.

The obtained information is used as part of the DIACOM information and analytical system.

Additional Operation with Software References

Depending on the installed database, DIACOM-FASTSCANER can additionally work with different groups of references, including:

🔹 vitamins

🔹 macronutrients

🔹 micronutrients

🔹 heavy metals

🔹 dietary supplements

🔹 other software categories

It is important to understand that the system does not perform laboratory chemical analysis and does not directly measure substance concentrations.

It compares registered frequency data with software references contained in the database.

Data Transfer for Further Work

Data obtained using DIACOM®-ENERSCAN® + DIACOM-FASTSCANER can be used for further work with compatible DIACOM personal generators.

Primarily:

📌 DIACOM-SOLO-FREQ-Personal-Medio

📌 DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

After the most active factors have been identified, the information can be prepared for subsequent use in frequency programs of compatible devices.

The operating sequence may be as follows:

1. Scanning with DIACOM®-ENERSCAN®

2. Data processing in DIACOM-FASTSCANER

3. Identification of the most active factors

4. Creation of a list of required frequency programs

5. Preparation and transfer of data

6. Subsequent work with DIACOM-SOLO-FREQ-Personal-Medio or DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

DIACOM-SOLO-FREQ-Personal-Medio

DIACOM-SOLO-FREQ-Personal-Medio can use prepared information for subsequent work with frequency programs.

The device allows the user to:

🔹 store programs in internal memory

🔹 operate autonomously

🔹 generate specified frequencies

🔹 execute frequency sequences

🔹 use individual programs

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto

DIACOM-SOLO-FREQ-Personal-Medio2-Magneto is an expanded version of the personal frequency generator.

It is additionally equipped with:

🔹 integrated magnetic module

🔹 enlarged 3.5″ display

🔹 expanded hardware modes

🔹 autonomous control system

Data obtained in the ENERSCAN + DIACOM-FASTSCANER system can be used to prepare the corresponding programs for further operation with this device.

Operation with a Computer

DIACOM®-ENERSCAN® is used together with a personal computer.

For correct operation, the device must be properly recognized by the operating system.

For this purpose, the following must be installed:

📌 DIACOM®-ENERSCAN® driver

The driver is required so that:

🔹 the computer correctly recognizes the device

🔹 DIACOM-FASTSCANER can establish communication with the device

🔹 stable data exchange is provided

🔹 the device works correctly with the software

Without the installed driver, ENERSCAN may:

— not be recognized by the computer

— be recognized incorrectly

— fail to establish a connection with DIACOM-FASTSCANER

— operate unstably

Driver installation is therefore a mandatory part of the initial device setup.

DIACOM-UPDATER

In addition to DIACOM-FASTSCANER, the following must be used for device maintenance:

📌 DIACOM-UPDATER

DIACOM-UPDATER is designed to check for and install updates to the device's embedded software.

DIACOM®-ENERSCAN® supports automated updating of the embedded software version.

Users are advised to launch DIACOM-UPDATER periodically and check for new versions.

Updates may include:

🔹 new functions

🔹 bug fixes

🔹 stability improvements

🔹 changes to data-exchange algorithms

🔹 compatibility improvements

🔹 new versions of embedded software

Update Procedure

To check for an update:

1. Install the ENERSCAN driver.

2. Install DIACOM-FASTSCANER.

3. Install DIACOM-UPDATER.

4. Connect the device to the computer.

5. Launch DIACOM-UPDATER.

6. Wait for the automatic version check.

If a new version is available, the software will perform the prescribed update procedure.

📥 Before starting an update, make sure that the Internet connection is stable and sufficiently fast.

⚠ During the update, do not:

— switch off the device

— disconnect the USB cable

— close DIACOM-UPDATER

— switch off the computer

— interrupt the Internet connection

— restart the system before the process is complete

Interrupting the update process may cause incorrect operation of the device.

Data Acquisition Principle

DIACOM®-ENERSCAN® works with fluctuations of weak electromagnetic oscillations.

The signals obtained are registered by the device hardware and transmitted to DIACOM-FASTSCANER.

The software then performs:

🔹 digital data processing

🔹 comparison with software references

🔹 determination of the strongest matches

🔹 ranking of factors

🔹 construction of graphical representations

🔹 generation of lists

🔹 generation of recommendations

Thus, ENERSCAN is responsible for obtaining the source data, while DIACOM-FASTSCANER is responsible for software processing and presentation of the information to the user.

Device Classification

DIACOM®-ENERSCAN® belongs to hardware and software devices that use principles of biological feedback and registration of weak electromagnetic signals.

The device:

🔹 is not a medical device

🔹 is not intended to establish a diagnosis

🔹 does not replace laboratory tests

🔹 does not replace consultation with a physician

🔹 is used as an informational and analytical tool

The system's primary purpose is associated with analysis of the obtained data, operation with software references, selection of dietary supplements, and preparation of information for compatible DIACOM frequency devices.

Main Advantages

DIACOM®-ENERSCAN® combined with DIACOM-FASTSCANER provides:

🔹 rapid scanning

🔹 analysis of electromagnetic fluctuations

🔹 identification of the most active factors

🔹 operation with software references for pathogenic microflora

🔹 selection of dietary supplements

🔹 operation with databases of specific manufacturers

🔹 automated generation of recommendations

🔹 visual presentation of results

🔹 data preparation for MEDIO

🔹 data preparation for MEDIO2-MAGNETO

🔹 operation with the device driver

🔹 automated updating via DIACOM-UPDATER

Main Areas of Application

DIACOM®-ENERSCAN® can be used for:

🔬 rapid scanning

📡 registration of electromagnetic fluctuations

🧬 identification of the most active frequency-related factors

🦠 operation with software references for pathogenic microflora

💊 selection of dietary supplements

📋 generation of product recommendations

🏭 operation with dietary-supplement manufacturer databases

📊 visualization of obtained data

🔗 preparation of information for compatible DIACOM devices

⚙ preparation of programs for MEDIO and MEDIO2-MAGNETO

Required Software

For full operation of DIACOM®-ENERSCAN®, the following must be used:

✅ DIACOM-FASTSCANER — main software for scanning, analysis, and generation of results

✅ DIACOM-UPDATER — software for checking and installing updates

✅ DIACOM®-ENERSCAN® driver — required for correct recognition of the device by the computer and stable communication with the software

All three components are important for correct system operation.

Safety and Correct Operation

For stable and correct operation of the device, the User Manual must be followed.

Users should:

🔹 use the device only in the intended modes

🔹 avoid mechanical damage

🔹 prevent liquid ingress

🔹 use undamaged cables

🔹 install the required driver

🔹 use DIACOM-FASTSCANER

🔹 regularly check for updates using DIACOM-UPDATER

🔹 not interrupt the update process

🔹 not open the device independently

Warranty

🛡 Diacom Technology® provides a limited 2-year warranty for the main electronic unit of DIACOM®-ENERSCAN®.

The warranty does not cover:

— battery

— cables

— consumable components

— mechanical damage

— damage caused by dropping

— impacts

— liquid ingress

— improper operation

— unauthorized opening

— independent repair

— other damage caused by user actions

To preserve warranty coverage, the User Manual and the specified operating conditions must be followed.

Training and Technical Support

❗ The price of DIACOM®-ENERSCAN® does not include training or technical support.

Training, extended technical support, configuration of specialized dietary-supplement manufacturer databases, and additional service options are provided separately and charged according to the terms of the specific offer.

DIACOM®-ENERSCAN®

DIACOM®-ENERSCAN® is a compact hardware and software system for rapid acquisition and analysis of frequency data.

Its primary purpose is to use scanning results processed in DIACOM-FASTSCANER to generate recommendations for dietary supplements and help identify the most suitable products from specialized software databases.

A second important area is the rapid identification of the most active negative factors, including pathogenic microflora and other software-defined pathogenic factors, followed by preparation and transfer of this information for use with DIACOM-SOLO-FREQ-Personal-Medio and DIACOM-SOLO-FREQ-Personal-Medio2-Magneto.

For correct operation of the device, it is necessary to:

✅ install the DIACOM®-ENERSCAN® driver

✅ use DIACOM-FASTSCANER

✅ use DIACOM-UPDATER

✅ periodically check for updates

✅ perform updates only with a stable and sufficiently fast Internet connection

DIACOM TECHNOLOGY® — technologies for researching the frequency characteristics of living matter and intelligent processing of the obtained data.

Certification is available upon request. Documents are available in PDF format.